Register with JPK as NDTS Training Center

Dear Sir/Madam,

Warmest greeting from MFC!

Malaysian Furniture Council (MFC), Vtar Institute and Department of Skills Development (JPK) have jointly organized the Furniture Technology Certification Course since 2016 using the National Dual Training System (NDTS). This program is based on the National Occupational Skills Standard (NOSS) which is prepared by following the career structure of the furniture industry (as attached). For more information regarding the course, kindly refer to the attachment "About MFC-VTAR Furniture Technology Certification Course".

Factories that are interested to join as a training center to provide practical training for trainee are required to register with JPK as NDTS Training Center (Pusat Bertauliah SLDN) under the category of NDTS Company (Syarikat SLDN). The program is currently providing training for SKM Level 2 and Level 3, the code and name of program are as below:

SKM Level 2 - RB-050-2:2012 Operasi Pembuatan Perabot

SKM Level 3 - RB-050-3:2012 Operasi Pembuatan Perabot

Enclosed please find the documents that need to be prepared and submitted to JPK for the Application to Register as NDTS Training Center:

  1. Borang Permohonan Pentauliahan Program Melalui Kaedah SLDN (JPK/SLDN/DT01) - Kindly refer to 'Panduan Mengisi Borang Permohonan Pentauliahan & Senarai Semak SLDN 2017' as the guideline for completing the form
  2. Senarai Kandungan Kurikulum Latihan/Silibus/Modul berdasarkan Cu/Duti/K-SLDN (JPK/SLDN/KM01)
  3. Senarai Peralatan Dan Bahan Di Syarikat Atau Syarikat In-House (JPK/SLDN/PS01) - Level 2, Level 3
  4. Surat Jalinan Kerjasama Pelaksanaan Program Bertauliah (JPK/SLDN/MU01)
  5. Perakuan Proses Kerja Syarikat/Syarikat Latihan Dalam (In-House) Berdasarkan Noss (JPK/SLDN/PK01) - Level 2, Level 3
  6. Surat iringan (Cover letter)
  7. Surat lantikan dan penerimaan pelantikan

For the other supporting documents, kindly refer to the checklist as attached.

On top of that, you may also refer to the 'Panduan Pentauliahan SLDN' to find out about the:

  1. Kriteria Syarikat SLDN - Page 9-10
  2. Kriteria Umum PB SLDN (Pusat Bertauliah SLDN) - Page 11-12
  3. Kriteria Personel Pentauliahan di Syarikat SLDN (Pengurus Pusat Bertauliah, Penyelaras, and Coach) - Page 12-13
  4. Perakuan Pengiktirafan Kelayakan Sebagai Personel Pentauliahan - Page 15
  5. Tanggungjawab Personel Pentauliahan (Pengurus Pusat Bertauliah, Penyelaras, and Coach) - Page 15-17
  6. Pentauliahan Program Baharu (Pentauliahan Baharu) - Page 18-19
  7. Tanggungjawab Syarikat SLDN - Page29-30

Kindly courier the application form and other supporting documents to MFC and we will assist to submit your application to JPK. The closing date is on 29th August 2017 (Tuesday), 5.00pm.

Should you have any enquiries regarding the application, please contact Encik Zulkifkli, Assistant Director of JPK Cyberjaya on +6012 212 3591.

 

马来西亚家具总会、VTAR技职学院以及国家技术发展局(JPK)自2016年起,联合举办了家具制造工艺文凭课程,并沿用了双轨培训系统(SLDN)来培育家具业人才。这是一项依据国家职业技能标准 (NOSS)所开办的培训课程,且配合了家具业的职业结构所量身定做的。 更多有关课程的详情,请参考附件 “About MFC-VTAR Furniture Technology Certification Course”。

有兴趣参与这项课程并提供实习训练给实习生的工厂,必须向JPK登记成为NDTS 培训中心(NDTS公司)。目前,该计划正在提供训练给马来西亚技术证书第2级和第3级,课程代码及名称如下:

马来西亚技术证书第2级 – RB-050-2:2012 Operasi Pembuatan Perabot

马来西亚技术证书第3级 – RB-050-3:2012 Operasi Pembuatan Perabot

请参考附件以获取向JPK申请成为NDTS培训中心时必须呈交的表格及其他文件:

1. 填写完整的申请表格(JPK/SLDN/DT01) – 请参考‘Panduan Mengisi Borang Permohonan Pentauliahan & Senarai Semak SLDN 2017’ 作为填写表格的指南

2. 课程内容表(JPK/SLDN/KM01)

3. 公司的工具、设备及材料清单(JPK/SLDN/PS01) - 第2级, 第3级

4. 实行SLDN的合作备忘录(JPK/SLDN/MU01)

5. 公司的工作流程申报表(JPK/SLDN/PK01) - 第2级, 第3级

6. 申请信函

7. 认证中心经理(PPB SLDN),协调员及每一位教练的委任书和接受委任信函

填写表格及文件时,您可参考附件的指南Panduan Mengisi Borang Permohonan Pentauliahan Program SLDN 2017。此外,申请表格的清单(第六页及第九页)已列出其他必须呈交的相关文件(请参考Jenis Permohonan Pentauliahan: Pentauliahan Program Baharu的部分)

另外,您也可以参考Panduan Pentauliahan SLDN以获取以下资讯:

1. 成为SLDN认证中心(PB SLDN)的标准 – 第11至12页

2. 成为SLDN公司的标准 – 第9至10页

3. 成为SLDN公司认证人员的标准 (认证中心经理、协调员及教练)– 第12至13页

4. 认证人员 (认证中心经理、协调员及教练)的责任 – 第15至17页

5. 新课程认证 – 第18至19页

6. SLDN公司的责任 – 第29至20页

请把申请表格及其他文件速递至马来西亚家具总会,我们会协助把贵公司的申请呈交给国家技术发展局(JPK)。申请截止日期是2017年8月29日(星期二)下午5时正

任何有关提交申请的疑问,请致电+6012 212 3591联络JPK Cyberjaya的主任助理Encik Zulkifli。

 

Furniture Technology Certification Course leaflet 600